Ironwood Anchor Rings

Anchor Ring anchor retrieval is designed for offshore applications.

Anchor Ring anchor retrieval is designed for offshore applications where longer lengths of anchor chain are common. Anchor Ring has been specifically engineered to offer exceptional performance and value to boaters. Once you have used our Anchor Ring anchor retrieval, you will never want to go back to hauling your anchor by hand again.

Key Features of Anchor Ring Anchor Retrieval

• Can lift up to 80 lb anchor systems, depending on the capacity of the buoy
• Stainless steel ring and shackle
• Designed for anchor lines rigged with more than 15 feet of chain
• Easy to use - just slip over your anchor line when ready to raise anchor
• Can be used with any size buoy
• Available in 2 models
  • Anchor Ring Standard is constructed from 1/4" stainless steel
  • Anchor Ring Heavy-duty is constructed from 5/16" stainless steel
• Lifetime warranty
• Made in the USA

How it works:

1. Slip the Anchor Ring over the anchor line and attach the shackle-buoy assembly to the ring. Be sure to snap the shackle through both eyes of the ring.
2. Toss the buoy into the water, allowing the ring to slide down the line. Motor your boat forward at a 30° angle off of your anchor point taking care to keep the anchor line clear of the prop. Proceed forward - at roughly 5 knots - until the anchor is released from the bottom, then increase speed slightly (to 6 or 8 knots). Do not continue forward if the anchor does not break free.
3. The anchor line will slide through the Anchor Ring as the buoy floats the anchor to the surface. Once the anchor has reached the surface, shift into neutral and pull in the slack anchor line and anchor.