Cold Cure was formulated to extend the number of months during which epoxy can be used effectively outdoors. Today Cold Cure is relied upon as an all-purpose epoxy resin system by boat builders, contractors, engineers, manufacturers, home owners and artisans.
Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system. Cold Cure has low odour and no VOC’s. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. Cold Cure is clear and is compatible with most paints and clear finishes. It is an excellent gap-filling putty when mixed with thickening agents and fillers. When cured it can be machined, drilled, sanded and tapped. It can be applied underwater. Cold Cure may be used effectively down to 2C (35F) in 100% relative humidity. It is an easy to use 2:1 ratio. It will not blush or turn milky in thin films and cures overnight. Nine kit sizes are available, all packaged in rust-proof containers.
Cold Cure is a waterproof:
- Structural adhesive
- Corrosion resistant coating
- Laminating resin
Mix Ratio: 2:1 by volume
Total Solids: 100%
Viscosity: Thin liquid
Application Temperature Range: 2C to 40C (35F to 102F)
Tensile Strength: 6,000 psi
Compressive Strength: 12,000 psi
Coverage: 20 sq ft/L as a coating
Service Temperature Range: -20C to 72C (-4F to 162F)
For manufactures website CLICK HERE